Circle, Oval, Square Leaf Stencil

Pair these with a needle tool to cut out pendants, charms and more from any jewellery clay. With a range of shapes and sizes to choose from, you can effortlessly create coordinated sets that are ideal for your project.

Stencil size 160mm x 105mm

Circle - 10mm, 12mm, 15mm, 20mm, 25mm, 30mm

Squashed Leaf - 10mm, 12mm, 15mm, 20mm, 25mm,30mm

Oval- 13mm x 10mm, 16mm x 12mm, 20mm x 15mm, 25mm x 17mm, 27mm x 20mm, 35mm x 25mm

All are printed on a textured plate giving a sand paper effect on one side. 


How to use:

1. Prepare your Clay: Roll your clay to your desired thickness.
2. Apply Release Agent: Lightly coat the stencil sheet and tools with olive oil or water to prevent sticking.
3. Position the Stencil: Lay the stencil sheet flat on the clay. Press the sheet down slightly.
4. Cut Out the Design: Use a needle tool to carefully trace the stencil pattern.
5. Remove the Stencil: Gently lift the stencil sheet to avoid distorting the design. Remove excess clay around the design.
6. Smooth the Edges: Use a damp brush or your finger to smooth any rough edges.
7. Dry and Finish: Let the metal clay piece dry completely before firing. Sand or refine the edges after drying if necessary.
8. Fire and Polish: Fire the clay according to the manufacturer's instructions. Polish or finish the metal as desired.